PROtech Super Floc Out Quart

Settles Debris to Pool Bottom – FAST

PROtech Super Floc Out is composed of a high cationic coagulant solution exhibiting a high flocculating ability in clearing up debris in pools and spas. It is specially formulated to help settle non-filterable suspended debris like carbonates, silica, dead algae or spores to the pool bottom, so they can be easily vacuumed to waste. Super Floc Out helps restore the sparkle to dull looking water. Super Floc Out is available in 1 quart (32 oz.) bottles.

BENEFITS:

• Produces Sparkling, Clear Water – Due to its excellent flocculating ability, it clears up turbid water by settling a wide range of non-filterable impurities suspended in pool water, thereby restoring the sparkle to your pool water.
• Begins Working Immediately – The greater the debris in the water, the faster this product works.
• Advanced Formula – Contains no corrosive alum or chloramine forming ammonia
• Economical – One bottle treats up to 40,000 gallons of water.
• Eliminates Need to add other balancing chemicals – Does not change pH of water, thereby eliminating the need for balance chemicals to alter pool chemistry.
• Aids filter performance – Increases filter efficiency by causing non-filterable particles to settle at the bottom for easy vacuuming.
• Safe – The product is safe for all pool types and filters which have vacuum to waste capability.

DIRECTIONS FOR USE: SHAKE WELL BEFORE USING

• Using a good test kit, adjust your pool water to a pH of 7.5 – 8.0.
• With pump on and filter valve in “Recirculate” position, add Super Floc Out slowly into skimmer. For filters without Recirculate position: backwash, then with filter in Filter Mode, dilute Super Floc Out into large plastic pail of water and apply evenly over surface of pool.
• Dose at a rate of 8 oz. per 10,000 gallons.
• Allow pump to circulate for 2 hours for even distribution throughout the pool.
• Shut off pump. Let Super Floc Out settle debris to bottom; leave the pool undisturbed for 12-48 hours.
• Double or triple dosage to speed settling time, if needed.
• Vacuum to waste all settled debris with filter in Waste or Drain mode.
• Note: Settling may continue for several days if new debris is introduced. If so, vacuum to waste again.
• Backwash and clean filter.